Good motorcycle maintenance does not only start when the engine fails to start or runs unevenly. The condition of the fuel and contamination in the fuel system also deserve attention. Especially when your motorcycle is stored for months during the winter. With Tec4 Moto Protect, you focus on fuel protection during periods of inactivity. Tec4 Moto Power is intended for cleaning the fuel system. But which product should you use when?
Why does fuel deserve attention during winter storage?
Fuel does not retain the same condition indefinitely. During prolonged inactivity, oxidation and the loss of volatile components can affect fuel quality. Gum and resinous deposits can also form. How quickly this happens depends, among other things, on the fuel, the temperature, and the storage conditions.
Contamination in the fuel system can contribute to difficult starting, uneven idling, and less smooth throttle response. This does not mean that every starting problem is caused by old fuel: the battery, ignition, and other technical components also play a role.
Tec4 Moto Protect: fuel protection during winter storage
Are you not going to use your motorcycle for a long time? Then the time before storage is suitable to pay attention to fuel protection. Tec4 Moto Protect is intended to support the storage stability of fuel and help limit deposits caused by fuel aging.
According to the provided product information, Moto Protect helps to stabilize fuel for up to 8 months. Always follow the current instructions on the packaging for applicability, protection duration, and dosage. The conditions during storage continue to affect the condition of the fuel.
How do you use Moto Protect before winter storage?
- Check whether the product is suitable for your motorcycle and fuel.
- Add the prescribed amount before storage. Adjust the dosage to the amount of fuel and the instructions on the packaging.
- Follow the motorcycle manufacturer's advice regarding the fuel level during storage. Do not fill the tank beyond the permitted level.
- Follow the product instructions to circulate the treated fuel through the fuel system before you put the motorcycle away.
A fuel additive is no substitute for a complete winter check. In addition, consider battery care, tire pressure, chain maintenance, and a suitable storage location. Moto Protect does not offer a general guarantee against rust, moisture problems, or starting problems for the entire motorcycle.
Tec4 Moto Power: cleaning the fuel system of your motorcycle
While Moto Protect focuses on inactivity, Tec4 Moto Power is intended for cleaning the fuel system. This makes it a product to consider when you are preparing the motorcycle for the riding season or when contamination affects the engine performance.
Deposits can disrupt the fuel supply and the operation of injectors or carburetor components. A suitable cleaning additive can help to address contamination. Always check the current product information for Moto Power regarding suitability for your fuel system and the components on which the product works.
When contamination is the cause, cleaning can contribute to smoother engine performance and better throttle response. However, lower fuel consumption or the recovery of lost power is not a guaranteed result. An additive does not repair worn components and does not fix electrical or mechanical faults.
Moto Protect or Moto Power: what is the difference?
Choose Moto Protect when the motorcycle is stored for a long time. The emphasis is on supporting fuel quality during storage. Add the product before inactivity according to the instructions for use.
Choose Moto Power when cleaning the fuel system is desired. The emphasis is on addressing contamination, for example as part of the preparation for a new motorcycle season. Do not automatically use both products together: first check the manufacturer's instructions.
Making your motorcycle ready to ride after winter
Before the first ride, check more than just the fuel. Look at the tires, brakes, lighting, fluid levels, and the drive system. Pay attention to unusual behavior during starting. Does the engine continue to be difficult to start, run unevenly, or lack power? Then have the cause investigated instead of exclusively adding an additive.
Frequently asked questions about Tec4 Moto additives
When do I add Moto Protect?
Before you put the motorcycle away for a long time. Follow the dosage and usage instructions on the packaging so that the product is applied in the intended manner.
How long does Moto Protect help protect fuel?
The provided product information mentions a stabilization duration of up to 8 months. Check the current packaging for the conditions and take storage conditions into account.
Can Moto Power help with an unevenly running engine?
It can when contamination in the fuel system plays a role and the product is suitable for the application. Uneven running can also have other causes. Therefore, have persistent complaints checked.
Do fuel additives replace a maintenance service?
No. Additives can be a supplement to motorcycle maintenance, but they do not replace an inspection, adjustment, oil change, or repair.
Advice on motorcycle maintenance and fuel protection
Do you want to prepare your motorcycle for winter storage or for the new riding season? Ask Motor Service Edgar Stijner for advice on Tec4 Moto Protect, Tec4 Moto Power, and suitable maintenance for your motorcycle. This way, you choose an approach that aligns with the use and technical condition of your motorcycle.